Nikon SB-26 Instruction Manual - Page 42
Non-TTL Auto Flash
![]() |
UPC - 018208047079
View all Nikon SB-26 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
1 Choose u position (flash mode selector). Confirm A appears in the LCD panel. 2 Choose W position (flash sync mode selector*). * q position is used for Rear-Curtain Sync Flash, and only with the F5, F90X/N90s, F90Series/ N90, F70-Series/N70, F4-Series, F-801/N8008, and F-801s/N8008s. For details, see page 105. 3 Set ISO film speed and position the built-in zoom head. For instructions, see "Setting ISO Film Speed (Manual Adjustment)," pages 27 to 28, and "Setting Zoom-Head Position (Manual Adjustment)," pages 29 to 30. 4 Set desired aperture in the SB-26's LCD panel, then set again on the camera. For instructions, see "Setting Aperture Value (Manual Adjustment)," pages 28 to 29. Indicator bars / show a appropriate shooting distance range. Chapter 3 Non-TTL Auto Flash A Mode F90X/N90s' viewfinder 5 Push  button for a test firing (see page 110) when you are not sure whether subject is within the flash shooting range. If ready-light  blinks for a few seconds after test firing, flash has fired at its maximum output but light might not have been sufficient. Select a wider aperture or move closer to subject. 6 Look into the camera viewfinder, compose and lightly the press shutter release button to confirm that subject is in focus. Check that ready-light is on in the camera's viewfinder g or on the SB-26 Â. 82 83
![](/manual_guide/products/nikon-sb26-instruction-manual-8a6c55e/42.png)