Nokia NBB5005000 Installation Guide - Page 29
Connecting Power and Turning the Power On, Table 4, Pin Assignments for DB9 and DB25 Interface Cables
View all Nokia NBB5005000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Performing the Initial Hardware Configuration Table 4 Pin Assignments for DB9 and DB25 Interface Cables Console or serial DB9 cable-output pin and DB25 cable-output pin and pin and assignment assignment assignment Shield (FG) Shield (FG) 1 (FG) 2 (RXD) 3 (TXD) 2 (TXD) 3 (TXD) 2 (RXD) 3 (RXD) 4 (DTR) 6 (DSR) 6 (DSR) 5 (SG) 5 (SG) 7 (SG) 6 (DSR) 4 (DTR) 20 (DTR) 7 (RTS) 8 (CTS) 5 (CTS) 8 (CTS) 7 (RTS) 4 (RTS) Connecting Power and Turning the Power On The power switch and receptacle for the power cord are located on the back of the gateway, as shown in Figure 3. The gateway power supplies automatically detects the input voltage (120 VAC [100 to 130] or 240 VAC [200 to 264]) and configures itself appropriately. Note The Nokia 5i and Nokia 10i automatically powers on when the power cable is connected. Nokia 5i and 10i Installation Guide 29