Nokia NBB5005000 Installation Guide - Page 33
Ethernet Cables, Ethernet Cable Pin Assignments, The Nokia 5i and Nokia 10i use IEEE 802.3 10 BASE-T
![]() |
View all Nokia NBB5005000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Connecting Network Interfaces Ethernet Cables The Nokia 5i and Nokia 10i use IEEE 802.3 10 BASE-T, 100 Base-TX shielded twisted-pair, CAT-5 ethernet cables. To connect Ethernet devices: Use a straight-through RJ-45 cable to connect to a 10-Mbps or 100-Mbps hub or switch. Use a crossover RJ-45 cable to connect directly to a host. After you connect the network interfaces, you can perform the initial gateway configuration. For information about how to configure the gateway, see Performing the Initial Gateway Configuration in the Nokia IP VPN Installation Guide. Ethernet Cable Pin Assignments Figure 5 shows the pin assignments for an RJ-45 cable. The RJ-45 cable output connector is numbered from left to right, with the copper tabs facing down and toward you. Nokia 5i and 10i Installation Guide 33
![](/manual_guide/products/nokia-nbb5005000-installation-guide-b3fbeca/33.png)