Nokia NBB5005000 Installation Guide - Page 31
System Status LEDs, System Status LEDs for the Nokia 5i and Nokia 10i, Table 5
View all Nokia NBB5005000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Performing the Initial Hardware Configuration System Status LEDs You can monitor the basic operation of the gateway and network interfaces by checking their status LEDs. The system status LEDs are located on the front panel of the gateway. Figure 4 System Status LEDs for the Nokia 5i and Nokia 10i 123 00418 Table 5 describes the LEDs on the Nokia 5i and Nokia 10i front panel. Table 5 System Status LEDs for the Nokia 5i and Nokia 10i LED Description PWR Off: Device not powered on. Steady green: Device is on. STAT Off: Device off. Steady green: Device passed hardware test and finished booting. Steady red: Hardware or software error. No recognizable boot device with a valid kernel found, or kernel panic. Steady amber: Booting. Blinking green: Device passed hardware check and is fully booted. Software is operating normally. Nokia 5i and 10i Installation Guide 31