Nokia NBB5005000 Installation Guide - Page 39
Common Ethernet Problems-Connectivity with Attached, Device
View all Nokia NBB5005000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Common Ethernet Problems-Connectivity with Attached Device Problem No link light. Solution You might have used the wrong cable. Use a crossover cable between the gateway and a host, and a straight-through cable between a gateway and a hub. Problem Steady activity LED. Solution You might have set the wrong speed. Verify that the speeds match on each end of the Ethernet connection (10 Mbps, 100 Mbps, or 1000 Mbps). Problem Port not enabled. Solution Verify from the Interface page in Nokia VPN Manager that the interface port is configured as active. Problem High collision rate on the hub. Solution Disconnect connections one at a time until the problem is localized to one computer and troubleshoot further. Nokia 5i and 10i Installation Guide 39