NordicTrack Exp2000 Treadmill English Manual - Page 21

Power Cord.

Get NordicTrack Exp2000 Treadmill PDF manuals and user guides View all NordicTrack Exp2000 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

PROBLEM: The power turns off during use SOLUTION: a. Check the circuit breaker located on the TREKKER near the power cord (see c. on page 20). If the circuit breaker has tripped, wait for five minutes and then press the switch back in. b. Make sure that the power cord is plugged in. c. Remove the key from the console. Re-insert the key fully into the console. d. Make sure that the on/off switch is in the "on" position. e. If the TREKKER still will not run, please call our Customer Service Department, toll-free. PROBLEM: The key is inserted and the displays on the console are lit, but the walking belt will not start SOLUTION: a. Unplug the power cord, wait for five minutes, and then plug the power cord back in. PROBLEM: The displays of the console do not function properly SOLUTION: a. Remove the key from the console and UNPLUG THE POWER CORD. Remove the two indicated Screws (118) from the Belly Pan (16). Loosen the other indicated Screw three turns. Carefully lift the Front Roller Cover (14). b. Locate the Reed Switch (87) and the Magnet (13) on the side of the Pulley (11). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 1/8". If necessary, loosen the Screw (43) and move the Reed Switch slightly. Retighten the Screw. Re-attach the front roller cover, and run the TREKKER for a few minutes to check for a correct speed reading. a 118 Loosen three turns 16 118 b 13 14 1/8" 87 43 Top 11 View PROBLEM: The grade of the TREKKER does not change correctly or does not change when iFIT.com CD's and videocassettes are played SOLUTION: a. With the key in the console, press one of the Grade buttons. While the grade is changing, remove the key. After a few seconds, re-insert the key. The TREKKER will automatically rise to the highest grade and then return to the lowest grade. This will recalibrate the TREKKER. b. If an "E6" appears in the Distance/Time display, remove the key and unplug the power cord. Wait for sixty seconds, plug in the power cord, and re-insert the key. 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
21
PROBLEM:
The power turns off during use
SOLUTION:
a. Check the circuit breaker located on the TREKKER near the power cord (see c. on page 20). If
the circuit breaker has tripped, wait for five minutes and then press the switch back in.
b. Make sure that the power cord is plugged in.
c. Remove the key from the console. Re-insert the key fully into the console.
d. Make sure that the on/off switch is in the “on” position.
e. If the TREKKER still will not run, please call our Customer Service Department, toll-free.
PROBLEM:
The key is inserted and the displays on the console are lit, but the walking belt will not start
SOLUTION:
a. Unplug the power cord, wait for five minutes, and then plug the power cord back in.
PROBLEM:
The displays of the console do not function properly
SOLUTION:
a. Remove the key from the console and
UNPLUG THE
POWER CORD.
Remove the two indicated Screws
(118) from the Belly Pan (16). Loosen the other indi-
cated Screw three turns. Carefully lift the Front Roller
Cover (14).
b. Locate the Reed Switch (87) and the Magnet (13) on
the side of the Pulley (11). Turn the Pulley until the
Magnet is aligned with the Reed Switch.
Make sure
that the gap between the Magnet and the Reed
Switch is about 1/8”.
If necessary, loosen the Screw
(43) and move the Reed Switch slightly. Retighten the
Screw. Re-attach the front roller cover, and run the
TREKKER for a few minutes to check for a correct
speed reading.
PROBLEM:
The grade of the TREKKER does not change correctly or does not change when iFIT.com
CD’s and videocassettes are played
SOLUTION:
a. With the key in the console, press one of the Grade buttons.
While the grade is changing, re-
move the key.
After a few seconds, re-insert the key. The TREKKER will automatically rise to the
highest grade and then return to the lowest grade. This will recalibrate the TREKKER.
b. If an “E6” appears in the Distance/Time display, remove the key and unplug the power cord. Wait
for sixty seconds, plug in the power cord, and re-insert the key.
13
118
118
14
16
Loosen
three
turns
b
Top
View
1/8”
43
87
11
a