Oki C610dtn C610, C711 User's Guide (English) - Page 62
Storage Setup
View all Oki C610dtn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Storage Setup Note: This menu only displays if the optional SD card is installed. ITEM Check File System Check All Sectors Enable SD Card Erase SD Card SETTINGS EXPLANATION Execute Execute No Yes Execute Resolves mismatch between actual memory and displayed memory available in a file system. Performs administration data (FAT information) recovery. Performs recovery only for an SD Card. Performs recovery of defective SD Card sector information and a file system mismatch mentioned above. Even if a machine is inoperable at installation because of a faulty SD Card, the machine can be made operable by setting this parameter to No (ignores the existence of the SD Card). When No is set, access to a SD Card results in FAIL because the SD Card is regarded as not attached. After setting change and exit from the menu, the printer will restart. Deletion of all data stored in the SD Card. DoD 5220.22-M sanitizing formula is used for clearing the card. The machine will restart after changing setup. The following message appears after pressing the Enter button. Are You Sure? Yes / No No = return to the source menu. Yes = the procedure for clearing disk stars immediately after the machine reboots. If the Cancel button is held down during erasing, the following confirmation messages will appear to discontinue processing. Do You Wish to Cancel? Yes / No No= procedure will continue. Yes = procedure will discontinue. 62 - C610/C711 User's Guide