Oki C7300 C7100/C7300/C7500 User's Guide: Macintosh - Page 174
Problems printing from Macintosh, Cannot con for USB connection., Cannot print., Possible cause
View all Oki C7300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
PROBLEMS PRINTING FROM MACINTOSH Cannot configure for USB connection. Possible cause USB cable does not meet specifications. Interface is disabled. Configuration procedure was not correctly followed or cancelled. USB cable is disconnected or faulty. A USB hub is being used. Remedy Use USB cable to specification Ver.1.1. Check that USB interface is set to Enable. Configure again from the beginning. Reconnect or try another cable. The printer cannot be used with a USB hub. Connect the printer and computer directly. Cannot print. • PRNUSBX WRITE ERROR is displayed. Possible cause Printer is switched OFF. Printer interface cable is disconnected. A converter, buffer, extension cable or USB hub is being used. Printer driver output port is incorrect. Remedy Switch ON. Reconnect the printer interface cable. Test by connecting the printer and computer directly. Set correct output port to which the printer interface cable is connected. 174 > C7100/C7300/C7500 Troubleshooting