Oki C7300 C7100/C7300/C7500 User's Guide: Macintosh - Page 213

and pull the, after switching the printer

Get Oki C7300 PDF manuals and user guides View all Oki C7300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 213 highlights

c. Carefully insert the module in the socket, placing the ends into the slot in the lock tabs. Press down firmly, until you feel the board engage the connector, then make sure the white tabs come up to lock the module in place. 4. Replace the main board and secure it with the two screws. 5. Reconnect the printer interface cable and power cable, then switch on the printer. NOTE If the error message SERVICE CALL/034 appears on the LCD after switching the printer on, turn the printer off and pull the main board back out and make sure the memory modules have been installed correctly. 6. Print a MenuMap (see "Printing the MenuMap" on page 35) and check that the Total Memory Size shown at the top of the MenuMap matches the memory now installed in the printer. If it doesn't, turn the printer off and pull out the main board and check to be sure that the modules are all firmly seated in their connectors. C7100/C7300/C7500 Accessories • 213

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
C7100/C7300/C7500 Accessories
• 213
c.
Carefully insert the module in the socket, placing the ends into
the slot in the lock tabs. Press down firmly, until you feel the
board engage the connector, then make sure the white tabs
come up to lock the module in place.
4.
Replace the main board and secure it with the two screws.
5.
Reconnect the printer interface cable and power cable, then
switch on the printer.
6.
Print a MenuMap (see “Printing the MenuMap” on page 35) and
check that the Total Memory Size shown at the top of the
MenuMap matches the memory now installed in the printer. If it
doesn’t,
turn the printer off
and pull out the main board and check
to be sure that the
modules are all
firmly seated
in their
connectors.
NOTE
If the error message SERVICE CALL/034 appears on the LCD
after switching the printer on,
turn the printer off
and pull the
main board back out and make sure the memory modules
have been installed correctly.