Oki C7300 C7100/C7300/C7500 User's Guide: Macintosh - Page 52

System Configuration Menu (continued) The default settings are bold. Item CLEARABLE WARNING Value On; Job AUTO CONTINUE MANUAL TIMEOUT On; Off 60 sec; 30 sec; Off WAIT TIMEOUT Off; 5 sec to 300 sec; default = 40 sec LOW TONER Continue; Stop JAM RECOVERY ON; OFF ERROR REPORT ON; OFF Description PCL emulation: Sets the time before deleting error messages. If On, press Error Delete switch to display error. If Job, error remains displayed until next print job is received. PS emulation: Error messages are only shown during job regardless of setting. Sets the printer to automatically recover after a memory overflow or print overrun. This parameter sets the period of time, that after requesting paper to be inserted and is not inserted, when the print job is cancelled. Only works in PostScript mode. Sets the time between receiving the last byte of data and the page being automatically ejected. Only works in PCL mode. In PS mode the job will be cancelled. If set to CONTINUE, allows printing to continue when Low toner is displayed. If STOP is selected when Low toner is displayed, the printer goes off line. Sets whether or not printing will continue after a paper jam has been cleared. If set to OFF, the print job that was being printed when the paper jam occurred will be cancelled after clearing the paper jam. When set to ON, the print job will continue after the jam has been cleared. When set to ON, prints an error report when internal error occurs. Only works in PostScript mode. 52 > C7100/C7300/C7500 Setting up