Oki C7300 C7100/C7300/C7500 User's Guide: Macintosh - Page 64
USB Menu The default settings are bold.
View all Oki C7300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Item USB SOFT RESET OFFLINE RECEIVE USB Menu The default settings are bold. Value ENABLE; DISABLE ENABLE; DISABLE ENABLE; DISABLE Description Selects USB interface. Enables/Disables soft reset command. Enable = maintains reception without changing the interface signal, even if an alarm occurs. The interface stays open even if the ON LINE button is pressed. The interface issues a BUSY signal only when the receive buffer is full. Network Menu This menu only appears if a network card is installed. The default settings are bold. Item TCP/IP NETWARE ETHERTALK NETBEUI FRAME TYPE DHCP/BOOTP RARP IP ADDRESS SUBNET MASK GATEWAY ADDRESS PRINT SETTINGS Value ENABLE; DISABLE ENABLE; DISABLE ENABLE; DISABLE ENABLE; DISABLE AUTO; 802.2; 802.3 ETHER-II; SNAP ENABLE; DISABLE ENABLE; DISABLE xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx ON; OFF Description Selects TCP/IP protocol. Selects Netware protocol. Selects EtherTalk protocol. Selects NetBEUI protocol. Selects Ethernet frame type. Selects whether selection of DHCP/ BOOTP is automatic. Selects whether selection of RARP is automatic. Configures IP address. Configures subnet mask. Configures gateway address. Selects printing of network menu map. ON = When printer exits the menu mode it will print the network MenuMap showing results of self-diagnosis and settings. 64 > C7100/C7300/C7500 Setting up