Oki C9650n Network and Configuration Guide - Page 112
Calibration Menu
View all Oki C9650n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Calibration Menu ITEM Auto density mode Auto BG adjust mode Adjust density Adjust registration Heavy media adjust VALUE OR SUBMENU ENTRY VALUE DESCRIPTION ON - OFF Off - -1 0 +1 +2 Execute - Execute - Off - -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 Sets whether density adjustment and TRC compensation is automatically performed. ON: density adjustment is automatically run under the printer specified conditions and reflected in TRC compensation. OFF: the printer does not carry out density adjustment automatically. Prevents dirty print backgrounds caused by unstable tonercharging conditions. The print density sensor detects the toner electric potentials and automatically adjusts supply voltage (SB) and charging voltage (CH). The menu does not appear when auto density mode is set to OFF. When Execute is selected, the printer carries out density compensation immediately and reflects it in TRC compensation. Density adjustment must be carried out when the printer is idling. When Execute is selected, the printer carries out registration adjustment automatically. Registration adjustment must be carried out when the printer is idling. Adjusts the fusing speeds for printing on heavy media. A value other than OFF adjusts the speed based on the automatic-adjustment value that has been set. Appendix: the printer menu > 112