Oki C9650n Network and Configuration Guide - Page 42
Setup by HTTP, Setup by TELNET, Reset, Test Print, IP Address Setup
View all Oki C9650n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
> Setup by HTTP Launches the default browser in your environment to access the selected printer's web page. > Setup by TELNET Launches the TELNET application in your environment to access the selected printer's TELNET port. NOTE The TELNET application is not included as part of the print server package. Install the TELNET package on to your system. For further information, see your Windows manual. > Reset Resets the selected network interface card. > Test Print Prints the network summary details (see page 11). > IP Address Setup Sets the static IP address of the network interface card manually. If you only use TCP/IP and the print server has not yet been configured, occasionally it may not be displayed on AdminManager. You can configure the IP address of the print server by this function. (a) Enter the Ethernet Address (MAC Address) and the IP Address, then click OK. NOTE The Ethernet (MAC) Address is displayed under "General Information" on the network summary printout (see page 11). (b) AdminManager asks whether you want to initialise the network interface card or not. Select Yes. NOTE Even if you select No here, the IP address that you set can be used after turning the printer OFF and ON. The requirement to turn your printer OFF and ON is dependent on the network interface card. Using adminmanager standard setup > 42