Oki C9650n Network and Configuration Guide - Page 14
Adminmanager, Quick, Setup
![]() |
View all Oki C9650n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
USING THE ADMINMANAGER QUICK SETUP INTRODUCTION NOTE > This utility can only be used on a PC that can be connected to the network with TCP/IP or IPX/SPX. > This utility must be used on a PC that is located in the same segment as the printer. The AdminManager Quick Setup utility allows you to configure the print server easily and simply without installing any software packages. You can configure the following: > Enable/disable TCP/IP, EtherTalk, NetBEUI protocols. > Set IP address, Subnet Mask and Gateway for TCP/IP manually or by using DHCP. > Set NetWare mode and create Queue/Print Server/Printer objects. > Zone name and Port name for EtherTalk. Using the adminmanager quick setup > 14
![](/manual_guide/products/oki-data-c9650dn-network-configuration-guide-c69ccc8/14.png)
Using the adminmanager quick setup > 14
U
SING
THE
ADMINMANAGER
QUICK
SETUP
I
NTRODUCTION
The AdminManager Quick Setup utility allows you to configure
the print server easily and simply without installing any software
packages.
You can configure the following:
>
Enable/disable TCP/IP, EtherTalk, NetBEUI protocols.
>
Set IP address, Subnet Mask and Gateway for TCP/IP
manually or by using DHCP.
>
Set NetWare mode and create Queue/Print Server/Printer
objects.
>
Zone name and Port name for EtherTalk.
NOTE
>
This utility can only be used on a PC that can be
connected to the network with TCP/IP or IPX/SPX.
>
This utility must be used on a PC that is located in the
same segment as the printer.