Oki ML1120 ML1120 User's Guide (English) - Page 36

Step 2, Load Paper

Get Oki ML1120 PDF manuals and user guides View all Oki ML1120 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

17. Install the top cover assembly. 1120_bottomfeed_25.jpg Step 2: Load Paper Nota If using single-part forms, maximum paper weight is 18 lb. (64 g/m2). 1. Make sure the printer is turned off. 2. Remove the top cover. 3. Move the paper lever-on the right side of the printer-toward the front of the printer to the continuous forms symbol. icon_forms.jpg 4. Place the stack of continuous forms paper below the printer. Bring the paper up through the slot on the bottom of the printer. 5. Pull the lock levers on the sprocket wheels forward and open the sprocket covers. 6. Adjust the wheels so the sprockets align with the holes in the continuous forms you are using. Microline 1120 User's Guide 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
Microline 1120 User°s Guide
36
17.
Install the top cover assembly.
1120_bottomfeed_25.jpg
Step 2:
Load Paper
Nota
If using single-part forms, maximum paper weight is 18 lb.
(64 g/m
2
).
1.
Make sure the printer is turned off.
2.
Remove the top cover.
3.
Move the paper leverµon the right side of the printerµtoward the front
of the printer to the continuous forms symbol.
icon_forms.jpg
4.
Place the stack of continuous forms paper below the printer.
Bring the
paper up through the slot on the bottom of the printer.
5.
Pull the lock levers on the sprocket wheels forward and open the
sprocket covers.
6.
Adjust the wheels so the sprockets align with the holes in the
continuous forms you are using.