Oki ML1120 ML1120 User's Guide (English) - Page 40
Form Tear Off
View all Oki ML1120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Form Tear Off The Form Tear Off feature allows you to advance continuous forms to the stacker for tear off. The printer default for Forms Tear Off is Off. To use this feature, you must enter the printer menu and turn it on. Turn On Forms Tear Off panel.jpg 1. Turn the printer on while holding down the SEL button. 2. Simultaneously press SHIFT and MODE to enter the Function Settings Menu. PRINTER CONTROL prints. 3. Press SEL repeatedly until REAR FEED prints. 4. Press LF/FF repeatedly until FORM TEAR-OFF prints. 5. Press MODE repeatedly until the interval you want to select (2 seconds, 1 second, or 500 milliseconds) prints. 6. Press and hold TEAR, then LOAD/EJECT, then LF/FF. This saves your setting and exits the menu mode. Move Continuous Forms Up for Tear Off Press TEAR to move continuous forms to the tear off position. Microline 1120 User's Guide 40