Olympus DS 20 DS-2000 Instructions - Purchased In or After September 2002 (Eng - Page 13
Set the POWER/LOCK switch to OFF.
UPC - 050332298736
View all Olympus DS 20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
SmartMedia inserted fully into the slot Ejecting SmartMedia cards Inserting and Ejecting SmartMedia cards When you set the POWER/LOCK switch to the ON position, "PLEASE WAIT" flashes on the display. SmartMedia not inserted fully into the slot Bottom side of SmartMedia projecting from the slot When you set the POWER/LOCK switch to the ON position, "INSERT CARD" flashes on the display for 2 seconds. Pressing any button with no SmartMedia card inserted causes "INSERT CARD" to appear again. Push the SmartMedia card fully into position. 1 P/LOOWCEKR OFF ON 2 1 Set the POWER/LOCK switch to OFF. The display disappears. 2 Raise the SmartMedia ejection switch. Pull the SmartMedia card out with your fingers. The SmartMedia ejection switch won't work if the POWER/LOCK switch is set to ON. Attention • SmartMedia cards are precision devices. Never force the cards when inserting them, or subject them to sharp blows. • Avoid handling and storing SmartMedia cards in a hot, damp environment. • Do not touch the contact area (gold electrodes) of the SmartMedia card with bare hands. If a SmartMedia card gets dirty, wipe it with a soft, dry cloth. • SmartMedia cards may be vulnerable to electrostatic data corruption. When carrying a SmartMedia card, put it in its case. Remember to back up data from SmartMedia cards to a PC or other storage medium from time to time ( P.39). 13 • Corrupted, lost, or erased data cannot be restored.