Olympus IR 300 IR-300 Advanced Manual (English) - Page 151
See Error messages
UPC - 050332151352
View all Olympus IR 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Troubleshooting Possible cause Corrective action Ref. page The colors of pictures look unnatural. Indoor lighting affected Set the white balance according to the the picture's colors. lighting. P. 46 No white in the picture. Include something white in the picture, or shoot using [#]. P. 38 The white balance setting is wrong. Adjust the white balance according to the light source. P. 46 Part of the picture is dark. The lens was partly Hold the camera correctly, keeping your - blocked by your finger or fingers and the strap away from the lens. the strap. Pictures you have taken do not appear on the monitor. The power is off. Set the mode switch to q, then press the POWER switch to turn the camera on. The camera is in the Set the mode switch to q. shooting mode. P. 10 P. 10 There are no pictures in [NO PICTURE] is displayed on the monitor. - the internal memory or Record pictures. on the card. There is a problem with See "Error messages". the card. P. 145 The camera is connected to a TV. The monitor does not function when the AV cable is connected to the camera. P. 76 Single-frame erase and all-frame erase cannot be performed. The pictures are protected. Cancel the protection of the pictures. P. 77 No picture is displayed on the TV when connected to the camera. The video output signal Set the video output signal according to the is incorrect. region where used. P. 77 Appendix The TV video signal Set the TV to the video input mode. - setting is incorrect. The monitor is hard to see. The brightness of the Use [s] to adjust monitor brightness. monitor is not adjusted properly. The monitor is exposed Block the sunlight with your hand. to direct sunlight. P. 100 - 12 151