Olympus SP-565 UZ SP-565UZ Instruction Manual (English) - Page 60

Using the alarm [ALARM CLOCK] x SETUP X ALARM CLOCK When [X] has not been set, [ALARM CLOCK] is not available. When [DUALTIME] (p. 59) is set to [ON], the alarm is activated at the date and time set in [DUALTIME]. Submenu 2 OFF ONE TIME DAILY Submenu 3 Submenu 4 - - TIME SNOOZE*2 (Proceeds to the setting screen*1.) OFF/ON SOUND TYPE 1/2/3 VOLUME LOW/HIGH (Submenus 3 and 4 can be set in the same way as [ONE TIME].) Application The alarm is canceled. The alarm is activated once according to the time, the sound type and the volume settings that are made here. The alarm is activated daily at the same settings. *1 The setting procedure is identical to that in "Setting the date and time" (p. 12) *2 In this setting, even if the alarm is stopped once, the alarm will be activated every 5 minutes, up to 7 times. To check the alarm time, press the g button while the camera is turned off. The current and alarm set times are displayed for approx. 3 seconds. To activate the alarm After making the detailed settings of [ONE TIME] or [DAILY], press the o button to turn off the camera. To stop the alarm When the alarm is activated, press any button to shut off the alarm and turn off the camera. When [SNOOZE] is set to [OFF], the alarm stops automatically and the camera turns off after 1 minute of no operation. Selecting a video signal system to match your TV [VIDEO OUT] x SETUP X VIDEO OUT The TV video signal system varies depending on the countries and regions. Before viewing camera images on your TV, select the video output according to your TV's video signal type. Submenu 2 NTSC PAL Application Connecting the camera to a TV in North America, Taiwan, Korea, Japan, etc. Connecting the camera to a TV in European countries, China, etc. The factory default settings differ according to the region where the camera is sold. 60 EN