Olympus X-560WP X-560WP Instruction Manual (English) - Page 14

Shooting, Playback, and Erasing, Shooting with optimum aperture value and shutter speed, Press - green

Page 14 highlights

Shooting, Playback, and Erasing Shooting with optimum aperture value and shutter speed (P mode) In this mode, automatic camera shooting can be used while also allowing changes to a wide range of other shooting menu functions, such as exposure compensation, white balance and so on as needed. For details on the functions that can be adjusted, see "Menus for Shooting Functions" on page 24. 2 Hold the camera, and compose the shot. Monitor P 1/400 F3.7 Horizontal grip 1 Press the n button to turn on the camera. P mode indicator P 10M NORM IN 4 Number of storable still pictures (p. 49) Monitor (standby mode screen) If P mode is not displayed, press the K button a few times to select it. Current shooting mode display Vertical grip When holding the camera, keep your fingers and other objects away from the flash. 3 Press the shutter button halfway down to focus on the subject. ● When the camera focuses on the subject, the exposure is locked (shutter speed and aperture value are displayed), and the AF target mark changes to green. ● The camera was unable to focus if the AF target mark flashes red. Try focusing again. P Press the n button again to turn off the camera. Before shooting, make sure that the lens is clean. Press halfway 1/400 F3.7 AF target mark Shutter speed Aperture value "Focusing" (p. 45) 14 EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66

EN
Shooting, Playback, and Erasing
Shooting with optimum
aperture value and shutter
speed (
P
mode)
In this mode, automatic camera shooting can
be used while also allowing changes to a wide
range of other shooting menu functions, such as
exposure compensation, white balance and so
on as needed.
For details on the functions that can be adjusted,
see “Menus for Shooting Functions” on page 24.
1
Press the
n
button to turn on
the camera.
10
M
4
IN
N
ORM
P
Monitor
(standby mode screen)
Number of storable still pictures (p. 49)
P
mode indicator
If
P
mode is not displayed, press the
K
button a few times to select it.
Current shooting mode display
Press the
n
button again to turn off
the camera.
Before shooting, make sure that the lens is
clean.
2
Hold the camera, and compose the
shot.
1/400
F3.7
P
Horizontal grip
Vertical grip
Monitor
When holding the camera, keep your
fingers and other objects away from the
flash.
3
Press the shutter button halfway
down to focus on the subject.
When the camera focuses on the subject, the
exposure is locked (shutter speed and aperture
value are displayed), and the AF target mark
changes to green.
The camera was unable to focus if the AF target
mark flashes red. Try focusing again.
1/400
F3.7
P
AF target mark
Press halfway
Shutter speed
Aperture value
“Focusing” (p. 45)