Onkyo BD-SP308 Owner Manual - Page 39

Audio Output Specifications Jack/Setting Analog 2CH Output Digital Output (DIGITAL AUDIO OUTPUT)*4 Source PCM Stereo DTS Re-encode*3*5 Primary Pass-Thru Dolby Digital PCM 2ch PCM 2ch DTS Dolby Digital Dolby Digital Plus PCM 2ch PCM 2ch DTS Dolby Digital Dolby TrueHD PCM 2ch PCM 2ch DTS Dolby Digital DTS PCM 2ch PCM 2ch DTS DTS DTS-HD PCM 2ch PCM 2ch DTS DTS Linear PCM 2ch PCM 2ch PCM 2ch DTS PCM 2ch Linear PCM 5.1ch PCM 2ch PCM 2ch DTS PCM 2ch Linear PCM 7.1ch PCM 2ch PCM 2ch DTS PCM 2ch Jack/Setting HDMI OUT Source PCM Stereo Dolby Digital PCM 2ch Dolby Digital Plus PCM 2ch Dolby TrueHD PCM 2ch DTS PCM 2ch DTS-HD PCM 2ch Linear PCM 2ch PCM 2ch Linear PCM 5.1ch PCM 2ch Linear PCM 7.1ch PCM 2ch PCM Multi-Ch*3 PCM 5.1ch PCM 5.1ch PCM 5.1ch PCM 5.1ch PCM 7.1ch PCM 2ch PCM 5.1ch PCM 7.1ch DTS Re-encode*3*5 Primary Pass-Thru*1*2*3 DTS Dolby Digital DTS Dolby Digital Plus DTS Dolby TrueHD DTS DTS DTS DTS-HD DTS PCM 2ch DTS PCM 5.1ch DTS PCM 7.1ch *1 The secondary and interactive audio may not be included in the output bitstream if "Digital Output" or "HDMI" option is set to "Primary Pass-Thru". (Except LPCM Codec: the output always includes interactive and secondary audio.) *2 This player automatically selects the HDMI audio according to the decoding capability of the connected HDMI device even though "HDMI" option is set to "Primary Pass-Thru". *3 The "PCM Multi-Ch"/"Primary Pass-Thru" setting of the "HDMI" option and "DTS Re-Encode" setting of the "Digital Output" option cannot be set together. If you set them together, the "HDMI" or "Digital Output" option is set to "PCM Stereo" automatically. *4 On the PCM audio output, the sampling frequency of DIGITAL AUDIO OUTPUT is limited to 96 kHz. *5 If the "HDMI" or "Digital Output" option is set to [DTS Re-Encode], the audio output is limited to 48 kHz and 5.1Ch. If the "HDMI" or "Digital Output" option is set to "DTS Re-Encode", the DTS Re-encode audio is output for BD-ROM discs, and the original audio is output for the other discs (like "Primary Pass-Thru"). • If "HDMI" option is set to "PCM Multi-Ch" and "Digital Output" option is set to "Primary Pass-Thru" while playback Dolby Digital Plus or TrueHD audio, DIGITAL AUDIO OUTPUT is limited to "PCM 2ch". • If the HDMI connection is version 1.3 and Dolby Digital Plus/Dolby TrueHD is output from HDMI OUT jack, DIGITAL AUDIO OUTPUT jack is limited to "PCM 2ch" (When the HDMI and DIGITAL AUDIO OUTPUT are connected simultaneously). • The audio is output as PCM 48 kHz/16 bit for MP3/ WMA file and PCM 44.1 kHz/16 bit for Audio CD while playback. • The Dolby TrueHD audio recorded on some Blu-ray discs consists of Dolby Digital and TrueHD audio. Dolby Digital audio is output through DIGITAL AUDIO OUTPUT jacks and "DD" displays on the screen if TrueHD audio is not output (for example, when "HDMI" is set to "PCM Stereo" and "Digital Output" is set to "Primary Pass-Thru"). • You must select a digital audio output and a maximum sampling frequency that your Amplifier (or AV receiver) accepts using "Digital Output", "HDMI" and "Sampling Freq." options on the "Setup" menu (➔ 20). • With digital audio connection (DIGITAL AUDIO OUTPUT or HDMI), Disc Menu button sounds of BD-ROM may not be heard if the "Digital Output" or "HDMI" option is set to "Primary Pass-Thru". • If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. • Multi-channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder. En 39