Onkyo HT-S3200 B User Manual - Page 55
Level Cal Speaker Levels Calibration, Equalizer Equalizer Settings, Notes, Left, Center, Right
View all Onkyo HT-S3200 B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Advanced Setup-Continued 5. Level Cal (Speaker Levels Calibration) You can set the volume level of each speaker so that all speakers can be heard equally at the listening position. A pink noise test tone is output by the front left speaker. Notes: • Speakers that you set to "No" or "None" in the "3. Sp Config" (page 53) do not output the test tone. • The speaker levels cannot be adjusted while a pair of headphones is connected, speaker set B is on, or the AV receiver is muted. Left, Center, Right, SurrRight, SurrLeft, Subwoofer The levels can be adjusted from -12 to +12 dB in 1 dB steps (-15 to +12 dB for the subwoofer). 6. Equalizer (Equalizer Settings) Here you can adjust the tone of individual speakers. To set the volume of individual speakers, see page 55. Notes: • While the Direct listening mode is selected, the equalizer settings have no effect. • The equalizer setting cannot be changed while a pair of headphones is connected, or speaker set B is on. EQ Audyssey: Listening environment is equalized by Audyssey EQ™. "Dynamic EQ" and "Dyn Vol" become available (page 57). Off: Tone off, No equalizing apply (default). 55