Onkyo HT-S570 Owner Manual - Page 11

Connecting to audio/video equipment Video Camera, Game Device, etc. (VIDEO 3) AUDIO VIDEO OUT OUT RL DVD player or component with 5.1 ch output (DVD)*1 DIGITAL VIDEO OUT OUT FRONT AUDIO OUT SURR CENTER SUBWOOFER COAXIAL RL RL *2 AM FM 75 ANTENNA Caution Make sure that the capacity of the other components connected to this unit does not exceed the capacity that is printed on the rear panel (120 watts). FRONT SPEAKERS B RL FRONT SPEAKERS A RL CENTER SPEAKER SURROUND SPEAKERS RL AC OUTLET DO NOT connect the power cord at this time. To connect the digital output from satellite tuner etc. connected to the VIDEO 1, VIDEO 2 or VIDEO 3 jacks to the COAXIAL or OPTICAL input jack of this unit, it is required to change the assignment of digital inputs to input sources by referring to "Setting the digital inputs" on page 21. RL AUDIO VIDEO OUT OUT Video cassette player, Satellite tuner, LD player*3, etc. (VIDEO 2) RL RL AUDIO VIDEO IN IN AUDIO VIDEO OUT OUT VCR (VIDEO 1) Video Audio (L) Audio (R) Coaxial plug Audio/video connection cable Coaxial cable (Digital signal) Signal flow *1 If the DVD player has both 5.1 channel audio outputs and 2 channel audio outputs, and you want to connect the DVD player only using the FRONT L/R jacks on the HT-R320, use the 2 channel audio output jacks on the DVD player. If the DVD player only has the 2 channel audio outputs, connect it to the FRONT L/R jacks. *2 To connect the digital output from DVD player connected to the DVD jacks to this unit, use the COAXIAL input jack. To connect the digital output to the OPTICAL input jack of this unit, it is required to change the assignment of digital inputs to input sources by referring to "Setting the digital inputs" on page 21. *3 If you have an LD player with AC-3RF output, connect via an AC-3RF demodulator to one of the HT-R320's DIGITAL INPUT terminals. 11