Onkyo HT-S570 Owner Manual - Page 30

Audio adjust function PRESET/ADJUST AUDIO ADJUST CINE FLTR LATE NIGHT AUDIO ADJUST ADJUST Before operating the remote controller, press RCVR/TAPE. Using the audio adjust functions Before operating the remote controller, press RCVR/TAPE. These functions only work with speaker system A. Audio Adjust provides various functions for adjusting the sound, including several especially for use with Dolby Digital, DTS, and Pro Logic II source. The following table lists the Audio Adjust functions, their ranges and default values. Function availability depends on the current source and listening mode, as listed in the "The input source and available listening mode" column. See page 29 for information on listening modes. Function Bass Treble Late Night Cinema Filter (Cine Fltr) Panorama Dimension Center Width Range Default -12 dB to +12 dB 0 dB in 2 dB steps Low, High, Off On, Off Off On, Off Off 0, 1, 2, 3, 4, 5, 6 0, 1, 2, 3, 4, 5, 6, 3 7 Supported listening mode All modes except Direct Dolby Digital Pro Logic II Movie Dolby Digital DTS DTS Neo:6 Cinema Pro Logic II Music 1. Press AUDIO ADJUST (repeatedly) until the item to be adjusted is displayed. 2. Press PRESET/ADJUST / on the unit or ADJUST / on the remote controller to adjust the item. Refer to the right column for AUDIO ADJUST items and settings. Item Value or setting Note Cinema Filter and Late Night can also be adjusted from the remote control. Press the CINE FLTR or LATE NIGHT button to display the current setting (On or Off). To change the current setting, press the same button again. Remote controller Remote controller 30