Onkyo HT-S570 Owner Manual - Page 8

Index to parts and controls Rear panel AM FM 75 ANTENNA FRONT SPEAKERS B RL FRONT SPEAKERS A RL CENTER SPEAKER SURROUND SPEAKERS RL AC OUTLET For operational instructions, refer to the page indicated in brackets. 1 REMOTE CONTROL [16] Connect the Onkyo components that have connectors such as a CD player, and cassette tape deck using the cables provided with them. When these components are interconnected, they can be controlled from the remote controller provided with the HT-R320. For correct operation, the audio connection cables must also be connected. This applies to both remote and standard operation. 2 ANTENNA [14, 15] These terminals are for connecting the FM antenna and AM antenna. 3 FRONT SPEAKERS B [13] These terminals are for connecting the speaker system B. 4 FRONT SPEAKERS A, CENTER SPEAKER and SURROUND SPEAKERS [13] These terminals are for connecting the speaker system A, including the center and surround speakers. 5 AC OUTLET [11] The HT-R320 is supplied with AC outlet for connecting the power cord from other devices so that their power is supplied through the HT-R320. By doing this, you can use the STANDBY/ON button on the HT-R320 to turn on and off the connected devices as well. 6 DIGITAL INPUT OPTICAL, COAXIAL [10, 11] These are digital audio inputs. There is 1 optical jack and 1 coaxial jack. The inputs accept digital audio signals from DVD, LD, CD, or other digital source. 7 SUBWOOFER PRE OUT [13] This terminal is for connecting an active subwoofer. 8 CD IN [10] Connect the output terminal on the CD player to the CD IN L/R jacks on the HT-R320. 9 TAPE IN/OUT [10] Connect the output terminals (PLAY) of the cassette tape deck or MD recorder to the TAPE IN L/R jacks on the HT-R320 and the input terminals (REC) to the TAPE OUT L/R jacks. p VIDEO 1 IN/OUT, VIDEO 2 IN, VIDEO 3 IN [11] Connect the output terminals (PLAY) of the video cassette recorder to the VIDEO 1 IN L/R jacks on the HT-R320 and the input terminals (REC) to the VIDEO 1 OUT jacks. Connect the output terminals of the video cassette player or satellite tuner to the VIDEO 2 IN or VIDEO 3 IN jacks on the HT-R320. q DVD [11] Connect the DVD player. If the DVD player has 5.1 channel output terminals, connect each terminal to the FRONT L/R, CENTER, SUBWOOFER, and SURR L/R terminals on the HT-R320. If the DVD player has only 2 channel output terminals, connect to the FRONT L/R terminals on the HT-R320. w MONITOR OUT [10] This output is for connecting television monitors or projectors. Tip The audio input jacks of the HT-R320 do not accept direct connection of an analog turnable. If you want to connect a turntable to the HT-R320 prepare a phono equalizer and connect it to the unused audio input jacks (IN L/R). Refer to the instruction manuals of the phono equalizer and turntable for details. 8