Onkyo HT-S7100 Owner Manual - Page 67
Adjusting the Listening Modes, Using the Audio Adjust Settings
UPC - 751398008559
View all Onkyo HT-S7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Adjusting the Listening Modes Using the Audio Adjust Settings With the Audio Adjust functions and settings, you can adjust the sound and listening modes as you like. 1 Press the [RECEIVER] REMOTE MODE button, followed by the [SETUP] button. The main menu appears onscreen. If the main menu doesn't appear, make sure the appropriate external input is selected on your TV. 2 Use the Up and Down [ ]/[ ] buttons to select "3. Audio Adjust," and then press [ENTER]. The Audio Adjust settings are explained below. Multiplex/Mono Settings Multiplex ■ Input Ch This setting determines which channel of a stereo multiplex source is output. Use it to select audio channels or languages with multiplex sources, multilingual TV broadcasts, and so on. Main: The main channel is output (default). Sub: The sub channel is output. Main/Sub: Both the main and sub channels are output. Mono ■ Input Ch This setting determines which channel is output when the Mono listening mode is used with a stereo source. Left+Right: Both the left and right channels are output (default). Left: Only the left channel is output. Right: Only the right channel is output. 3 Use the Up and Down [ ]/[ ] PLIIx/Neo:6 Settings buttons to select an item, and then press [ENTER]. PLIIx Music (2 ch Input) These settings apply to only 2-channel stereo sources. 3. Audio Adjust 1. Multiplex/Mono 2. PL II x/Neo:6 If you're not using any surround back speakers, these settings apply to Dolby Pro Logic II, not Dolby Pro 3. Dolby EX 4. Theater-Dimensional Logic IIx. ■ Panorama With this setting, you can broaden the width of the front stereo image when using the Dolby Pro Logic IIx Music listening mode. On: Panorama function on. 4 Use the Up and Down [ ]/[ ] Off: Panorama function off (default). buttons to select an option, and use the Left and Right [ ]/[ ] ■ Dimension buttons to change it. With this setting, you can move the sound field forward The Audio Adjust menu items are explained below. or backward when using the Dolby Pro Logic IIx Music listening mode. It can be adjusted from -3 to +3. The default value is 0. Higher settings move the sound field backward. Lower settings move it forward. If the stereo image feels too wide, or there's too much surround sound, move the sound field forward to improve the balance. Conversely, if the stereo image feels like it's in mono, or there's not enough surround sound, move it backward. 5 When you've finished, press the [SETUP] button. Setup closes. 67