Onkyo HT-S7100 Owner Manual - Page 82
Lock Setup, Disable, Enable, Notes, Locked
UPC - 751398008559
View all Onkyo HT-S7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Advanced Setup-Continued TV Control Select Enable to control the AV receiver from an RIHDcompatible TV connected via HDMI. Disable: TV Control disabled. Enable: TV Control enabled. Notes: • Select Disable if your TV is incompatible or you're not sure about its compatibility. • The TV Control setting can be set only when the above Control and Power Control settings are both set to Enable. • When the Audio TV Out setting is set to On, or TV Control is set to Enable and you're listening through your TV's speakers (see page 31), if you turn up the AV receiver's volume control, the sound will be output by the AV receiver's speakers. To stop the AV receiver's speakers producing sound, change the settings, change your TV's settings, or turn down the AV receiver's volume. Note: • After changing the Control, Power Control, or TV Control setting, be sure to turn all of your components off and then back on again. Refer to the instruction manuals for your other components. Lock Setup With this setting, you can protect your settings by locking the setup menus. 1 Press the [RECEIVER] button, followed by the [SETUP] button. The main menu appears onscreen. If the main menu doesn't appear, make sure the appropriate external input is selected on your TV. 2 Use the Up and Down [ ]/[ ] buttons to select "8. Lock Setup," and then press [ENTER]. 3 Use the Left and Right [ ]/[ ] buttons to select: Locked: Setup menus locked. Unlocked: Setup menus unlocked. When Locked is selected, only this Lock Setup item can be accessed. 4 Press the [SETUP] button. Setup closes. 82