Onkyo HT-S7100 Owner Manual - Page 84
Powered Zone 2 Setting, Notes, Not Act
UPC - 751398008559
View all Onkyo HT-S7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Zone 2-Continued Powered Zone 2 Setting 3 If you've connected your Zone 2 speakers to the AV receiver, as explained in "Connecting Your Zone 2 Speakers Directly to the AV receiver" on page 83, you must set the Powered Zone 2 setting to Act (Activated). Use the Up and Down [ ]/[ ] buttons to select "2.Zone2," and then press [ENTER]. ENTER SETUP RECEIVER 4 Use the Left and Right [ ]/[ ] buttons to select: 7-2. Zone2 Powered Zone2 Not Act NotAct: ZONE 2 SPEAKERS L/R speaker terminals not activated (Powered Zone 2 disabled). Act: ZONE 2 SPEAKERS L/R speaker terminals activated (Powered Zone 2 enabled). 1 Press the [RECEIVER] REMOTE MODE button, followed by the 5 Press the [SETUP] button. [SETUP] button. Setup closes. The main menu appears onscreen. If the main menu doesn't appear, make sure the appropriate external input is selected on your TV. Notes: • When Act is selected and Zone 2 turned on, the Zone 2 speakers connected to the ZONE 2 L/R speaker termi- 2 Use the Up and Down [ ]/[ ] buttons to select "7. Hardware- nals output sound, but the surround back speakers connected to the SURR BACK L/R speaker terminals do Setup," and then press [ENTER]. not. When Act is selected and Zone 2 turned off, the surround back speakers output sound as normal. • Powered Zone 2 cannot be used if Speaker Type is set to Bi-Amp. • This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow buttons. 84