Onkyo LS3100 Owner Manual - Page 11

Placement This section explains how to mount/place the controller, the front speaker and the subwoofer. In this instruction manual, Sound System Controller (LAP-301) is described as "controller". 5-11/16" (145 mm) Screw BC D Bottom of the LAP-301 Keyhole slots for wall mounting B Sound System Controller (LAP-301) C Front speakers (SLM-301) D Subwoofer (SLW-301) Mounting the Controller The controller can be placed on the flat floor, and also mounted to the wall by using a commercially available wall-mounting screw. ■ Wall mounting 1 Mark the two points by using a pencil so that the controller can be mounted horizontally. 2 Insert a commercially available wallmounting screw into the mark and screw it. 3 Insert the head of the screw into the keyhole slot on the bottom of the controller and fix it firmly. Please confirm that the head of the screw is at the top of the hole. Tip • The controller can be mounted upside-down. Caution • For mounting the controller, Wall use a screw with a head diameter of 1/4" (6 mm) or more and 2/32" (7 mm) or less, and a shank diameter of 1/8" (3 mm) or more and 3/16" to 1/4" 5/32" (4 mm) or less. The (5 to 6 mm) screws as thick and long as possible are recommended. • Leave a gap of between 3/16" (5 mm) and 1/4" (6 mm) between the wall and the base of the screw head, as shown (We recommend that you consult a home installation professional). • Mount the controller as close as possible to the TV set without hiding the remote control sensor for the TV remote controller. • Mount the controller in a well-ventilated place. En 11