Onkyo LS3100 Owner Manual - Page 19

About the Auto Standby function The controller will automatically enter standby mode if there is no audio input for five minutes. When Auto Power On is set to on, the controller will enter ready mode. Using the Sound Modes Selecting Sound Modes You can switch the sound mode only with the remote controller. SOUND MODE button This button switches between the Normal Mode and Vocal Mode. The ON/STANDBY LED flashes white once by selecting the Normal Mode. When the mode is switched to the Vocal Mode, the ON/STANDBY LED flashes white twice. Sound Mode Normal Mode Vocal Mode Description In this mode, sound quality compensation process technology, SRS WOW HD™ significantly improves the playback quality of audio, delivering a dynamic 3D entertainment experience with deep, rich bass and high frequency clarity for crisp detail. In this mode, music equalization technology, SRS TruVolume® adjusts the volume to comfortable and stable level. TruVolume maintains a steady volume, allowing listeners to set their desired volume level once to enjoy television, music and all other content without annoying volume fluctuations. Tip • The Sound Mode can be set by each of TV selector and Bluetooth selector separately. Listening to an audio from Bluetooth device Note • If your mobile phone supports A2DP protocol, its music will play through the controller. 1 Press the /TV input button on the top panel repeatedly or INPUT on the remote controller until the Bluetooth LED lights to select the Bluetooth selector. The controller searches the component connected previous time and starts the pairing in five seconds when the corresponding item is not found. Note • If you press the /TV input button on the top panel or INPUT on the remote controller again during pairing and switch the selector to TV, the operation will be cancelled. 2 While the Bluetooth LED is flashing (25 seconds), you can operate the Bluetooth-enabled device to pair with the controller within a 32 ft. (10 m) range. For details on the Bluetooth connection, refer to the user manual of the Bluetoothenabled device. The controller may not work as normal depending on the circumstance even though the controller is placed within the 32 ft. (10 m) range. In such cases, get the Bluetooth-enabled device closer to the controller and retry the operation. 3 Once the controller is detected and its name "Onkyo LS3100" appears on the display of your Bluetooth-enabled device, select the "Onkyo LS3100". If a prompt requests a password (PIN code), key in the "0000". When a Bluetooth connection is established successfully, the Bluetooth LED flashes twice. 4 Start playback on your device. The controller automatically starts playing the audio. En 19