Onkyo LS3100 Owner Manual - Page 17

Operations Operations / INPUT VOLUME +/SOUND MODE SUBWOOFER +/- Enjoying the sound ■ Operating with the remote controller 1 Turn on the connected TV. 2 Press INPUT to select the TV selector. See also: • "Listening to an audio from Bluetooth device" (➔ page 19) 3 To adjust the volume, use VOLUME +/-. 4 Select a sound mode and enjoy! See also: • "Using the Sound Modes" (➔ page 19) ON/STANDBY ON/STANDBY LED Volume -/+ /TV input Bluetooth LED ■ Operating on the controller 1 Turn on the connected TV. 2 Press the /TV input button repeatedly until the Bluetooth LED goes off to select the TV selector. 3 To adjust the volume, use the Volume -/+ buttons. Turning On the controller 1 Press ON/STANDBY on the top panel. or Press  on the remote controller. The controller comes on, and the ON/STANDBY LED lights white. Press ON/STANDBY or  again to set the controller to standby mode. Tip • Adjust the volume by 1 step in the 0 to 35 range. • The ON/STANDBY LED flashes by receiving the signal from the remote controller. • When the Auto Power On function is set to on, the controller is automatically turned on by receiving the audio input from the TV and the TV selector is selected. Tip • For details on power management settings, see "Setting the Auto Power On" (➔ page 18). Note • To prevent any loud surprises when you turn on the controller, always turn down the volume before you En turn it off. 17