Onkyo LS3100 Owner Manual - Page 18

Adjusting the Subwoofer Level 1 Press SUBWOOFER +/- on the remote controller. You can adjust the volume of subwoofer while listening to an input source. Adjust the volume by 1 step in the -10 to 10 range. The default is 0. Muting the controller You can temporarily mute the output of the controller. ■ Operating with the remote controller 1 Press . The output is muted and ON/STANDBY LED flashes white. ■ Operating on the controller 1 Simultaneously press and hold the Volume -/+ buttons on the top panel. Pressing Muting button on your TV remote controller sets both the controller and the TV to muting mode. If you press and hold the Muting button on your TV remote controller for three seconds again, the controller changes the setting. This is the function that adjusts the controller's setting to the TV's setting by switching the controller's setting when the controller's setting and TV's setting of on/off are different. Tip • To cancel the muting, press on the remote controller again or simultaneously press the Volume -/+ buttons on the top panel or change the volume level. • Muting is automatically cancelled when the controller is set to standby mode. Setting the Auto Power On This function switches between standby mode and ready mode. When Auto Power On function is set to on, the controller will enter ready mode, and when set to off, it will enter standby mode. In ready mode, the controller will be automatically turned on in conjunction with audio input from the TV and TV selector will be selected. 1 Turn off the controller. 2 Press and hold ON/STANDBY on the top panel for three seconds. The controller enters ready mode and ON/STANDBY LED flashes amber indicating that the setting is completed. 3 Press and hold ON/STANDBY on the top panel for three seconds again to turn the Auto Power On function "off". The controller automatically enters standby mode and the ON/STANDBY LED goes off. Default: Ready (North American models), Standby (European and Australian models) If you operate the controller with your TV remote controller, set the Auto Power On function to on. The controller cannot be turned on by using Power On button on your TV remote controller. Note • If you don't want the controller to be turned on automatically when the TV is on, set the Auto Power On function to off. • When the controller is in ready mode with Auto Power On function "on", the controller will be turned on by receiving the audio input from the TV. • When entering the ready mode with the Bluetooth selector selected, the controller might be turned on by selecting the TV selector automatically by receiving the audio input from the TV. En 18