Onkyo TX-NR1008 Owner Manual - Page 43

Explanatory Notes B Main Menu Speaker Setup C ■ Subwoofer D ` Yes: Select if a subwoofer is connected. ` No: Select if no subwoofer is connected. B Menu selection C Setting target D Setting options (default setting underlined) Input/Output Assign Main Menu Input/Output Assign Monitor Out On the "Monitor Out" settings, you can select whether or not to have the video sources' images output through the HDMI output, as well as whether to have the onscreen setup menu output through the HDMI output or through an analog output. If you connect your TV to HDMI output, "Monitor Out" setting is automatically set so that the onscreen setup menus are displayed and composite video, S-Video, and component video sources are upconverted* and output. Composite video, S-Video, component video IN HDMI OUT Composite video, S-Video, component video HDMI If you connect your TV to the COMPONENT VIDEO MONITOR OUT (not the HDMI output), "Monitor Out" setting is automatically set so that the onscreen setup menus are displayed and composite video and S-Video sources are upconverted* and output. Composite video, S-Video Component video IN Note • See "Video Connection Formats" (➔ 22) for charts showing how the "Monitor Out" and "Resolution" settings (➔ 44) affect the video signal flow through the AV receiver. ■ Monitor Out ` Analog: Select this if your TV is connected to the COMPONENT VIDEO MONITOR OUT, MONITOR OUT S, or MONITOR OUT V. ` HDMI Main: Select this if your TV is connected to the HDMI OUT MAIN. ` HDMI Sub: Select this if your TV is connected to the HDMI OUT SUB. ` Both: Select this if your TVs are connected to the HDMI OUT MAIN and HDMI OUT SUB. Video signals are output from both HDMI outputs at the resolution supported by both TVs. ` Both(Main): Select this if your TVs are connected to the HDMI OUT MAIN and HDMI OUT SUB. Video signals are output from both HDMI outputs but HDMI OUT MAIN will become a priority; depending on the resolution, video signals may not be output from HDMI OUT SUB. ` Both(Sub): Select this if your TVs are connected to the HDMI OUT MAIN and HDMI OUT SUB. Video signals are output from both HDMI outputs but HDMI OUT SUB will become a priority; depending on the resolution, video signals may not be output from HDMI OUT MAIN. Note • If not connected to the same output you have selected in the "Monitor Out" setting, the "Monitor Out" setting will be automatically switched to "Analog" (➔ 23). • When you select other than "Analog", the onscreen setup menus are output by only the HDMI output. If you're not using the HDMI output and select settings by mistake and the menus disappear, press AV receiver's MONITOR OUT to select "Analog". • For Deep Color output, if the "Monitor Out" setting is set to "Both(Main)" or "Both(Sub)", the number of bit may be limited due to the capability of your TV connected to a priority output. OUT Composite video, S-Video Component video En 43