Onkyo TX-NR1008 Owner Manual - Page 46

■ BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, AUX, TV/CD, PHONO, PORT ` IN 1, IN 2: Select a corresponding component video input that the video component has been connected Select if you are using HDMI output, rather than the COMPONENT VIDEO MONITOR OUT, for the output from composite video, S-Video, and component video sources. Note • For composite video and S-Video upconversion for the COMPONENT VIDEO MONITOR OUT, the "Monitor Out" setting must be set to "Analog" (➔ 43), and the "Component Video Input" setting must be set to See "Video Connection Formats" for more information on video signal flow and upconversion (➔ 22). • If not connected to the same output you have selected in the "Monitor Out" setting, the "Monitor Out" setting will be automatically switched to "Analog" (➔ 43). • If you connect a component (such as UP-A1 Dock that seated iPod) to the UNIVERSAL PORT jack, you cannot assign any input to "PORT" selector. Digital Audio Input If you connect a component to a digital audio input, you must assign that input to an input selector. For example, if you connect your CD player to the OPTICAL IN 1, you must assign "OPT 1" to the "TV/CD" input selector. Here are the default assignments. Input selector BD/DVD VCR/DVR CBL/SAT GAME PC AUX TUNER TV/CD PHONO PORT Default assignment COAX 1 COAX 2 COAX 3 OPT 1 ----FRONT (Fixed Fixed) OPT 2 --------- ■ BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, TV/CD, PHONO, PORT ` COAX 1, COAX 2, COAX 3, OPT 1, OPT 2: Select a corresponding digital audio input that the component has been connected Select if the component is connected to an analog audio input. • "AUX" is used only for input from the front panel. Note • When an HDMI IN is assigned to an input selector in "HDMI Input" (➔ 45), the same HDMI IN will be set as a priority in this assignment. In this case, if you want to use the coaxial or optical audio input, make the selection in the "Audio Selector" in the Home menu (➔ 62). • Available sampling rate for PCM signals from a digital input (optical and coaxial) is 32/44.1/48/88.2/96 kHz/16, 20, 24 bit. • If you connect a component (such as UP-A1 Dock that seated iPod) to the UNIVERSAL PORT jack, you cannot assign any input to "PORT" selector. Analog Audio Input Some DVD players output the LFE channel from their analog subwoofer output at 15 dB higher than normal. With this setting, you can change the AV receiver's subwoofer sensitivity to match your DVD player. ■ Subwoofer Input Sensitivity ` 0dB to 15dB in 5 dB step. Note • This setting only affects signals connected to the AV receiver's multichannel input SUBWOOFER jack. • If you find that your subwoofer is too loud, try the 10 dB or 15 dB setting. En 46