Onkyo TX-NR1010 Owner Manual - Page 62

• If you assign to an input selector that is currently selected in "HDMI Through" (➔ page 80), the "HDMI Through" setting will be automatically switched to "Off". • "AUX" is used only for input from the front panel. Component Video Input If you connect a video component to a component video input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to COMPONENT VIDEO IN 2, you must assign "IN2" to the "BD/DVD" input selector. If you've connected your TV to the AV receiver with a component video cable, you can set the AV receiver so that composite video source is upconverted* and output by the COMPONENT VIDEO MONITOR OUT*1. You can set this for each input selector by selecting the option. Composite video Component video IN Advanced Operations ■ BD/DVD, CBL/SAT, STB/DVR, GAME1, GAME2, PC, AUX, TV/CD, PHONO `IN1, IN2: Select the input to which the component has been connected Output composite video sources from the HDMI output. Note • For composite video upconversion for the COMPONENT VIDEO MONITOR OUT, the "Monitor Out" setting must be set to "Analog" (➔ page 60), and the "Component Video Input" setting must be set to See "Connection Tips and Video Signal Path" for more information on video signal flow and upconversion (➔ page 107). Composite video OUT Component video *1 This applies only when "Monitor Out" setting is set to "Analog" (➔ page 60). Here are the default assignments. Input selector BD/DVD CBL/SAT STB/DVR GAME1 GAME2 PC AUX TV/CD PHONO Default assignment IN1 IN2 En-62