Onkyo TX-NR828 Owner's Manual English - Page 50
En-50, Listening Mode, Description, Input, Source, Speaker, Layout
View all Onkyo TX-NR828 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Listening Mode THX Su r r EX Description Input Speaker Source Layout • THX Surround EX This mode expands 5.1-channel sources for 6.1/7.1- channel playback. It's especially suited to Dolby Digital EX sources. THX Surround EX, also known as Dolby Digital Surround EX, is a joint development between Dolby Laboratories and THX Ltd. % ) 7 Note *1 Pure Audio cannot be selected when Zone 2/3 is active. Besides, if you activate Zone 2/3 while Pure Audio is selected, the listening mode will automatically switch to Direct. *2 Based on the audio channel signal contained in the source, the corresponding speakers will output the sound. *3 The AV receiver can input the DSD signal from HDMI IN. Depending on the player, setting the output on the player side to PCM might bring better sound. *4 For the Blu-ray Discs, Dolby Digital is used in a 3.1/5.1-channel speaker system. *5 DTS is used depending on the configuration of the AV receiver. *6 If there are no surround back speakers, DTS is used. *7 If there are no surround back speakers, Dolby Pro Logic II is used. *8 This listening mode can be selected only when all the following conditions are satisfied: - Center speaker is connected. - Either the front high or front wide speakers are connected. En-50 Playback