Onkyo TX-NR828 Owner's Manual English - Page 73
Listening Mode Preset, 6. Miscellaneous, En-73
View all Onkyo TX-NR828 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
5. Listening Mode Preset You can assign a default listening mode to each input source that will be selected automatically when you select each input source. For example, you can set the default listening mode to be used with Dolby Digital input signals. You can select other listening modes during playback, but the mode specified here will be resumed once the AV receiver has been set to standby. 1 Use R/X to select the input source that you want to set, and then press ENTER. The following menu appears. 5-1. Listening Mode Preset Analog/PCM Mono/Multiplex Source 2ch Source Dolby D/Dolby D Plus/TrueHD DTS/DTS-ES/DTS-HD Other Multich Source BD/DVD Last Valid F S Last Valid Last Valid Last Valid Last Valid Last Valid Default listening mode for analog and PCM sources. 2 Use R/X to select the signal format that you want to set, and then use F/S to select a listening mode. Only listening modes that can be used with each input signal format can be selected (➔ pages 44 to 51). The "Last Valid" option means that the listening mode selected last will be used. The "Straight Decode" option means that straight decoding listening mode (Dolby Digital, DTS, etc.) is selected. Note • For the "TUNER" input selector, only "Analog" will be available. • For the "NET" or "USB" input selector, "Digital" and "TrueHD" will be available. • For the "BLUETOOTH" input selector, only "Digital" is available. ■ Analog/PCM/Digital With this setting, you can specify the listening mode used when an analog (CD, TV, LD, VHS, MD, turntable, radio, cassette, cable, satellite, etc.) or PCM digital (CD, DVD, etc.) audio signal is played. Note • For the "GAME2" input selector, only "PCM" is available. ■ Mono/Multiplex Source With this setting, you can specify the listening mode used when a mono digital audio signal is played (DVD, etc.). ■ 2ch Source With this setting, you can specify the listening mode used when 2-channel (2/0) stereo digital sources, such as Dolby Digital or DTS, are played. ■ Dolby D/Dolby D Plus/TrueHD With this setting, you can specify the listening mode used when Dolby Digital or Dolby Digital Plus format digital audio signals are played (DVD, etc.). Specifies the default listening mode for Dolby TrueHD sources, such as Blu-ray or HD DVD (input via HDMI). ■ DTS/DTS-ES/DTS-HD With this setting, you can specify the listening mode used when DTS or DTS-HD High Resolution format digital audio signals are played (DVD, LD, CD, etc.). Specifies the default listening mode for DTS-HD Master Audio sources, such as Blu-ray or HD DVD (input via HDMI). ■ Other Multich Source Specifies the default listening mode for multichannel PCM sources from HDMI IN such as DVD-Audio, and DSD multichannel sources such as Super Audio CD. 6. Miscellaneous Advanced Operations Volume Setup ■ Volume Display ` Absolute: Displayed range is Min, 0.5 to 99.5, Max. `Relative (THX): Displayed range is -2dB, -81.5dB to +18.0dB. With this setting, you can choose how the volume level is displayed. The absolute value 82 is equivalent to the relative value 0 dB. Note • If the absolute value is set to 82, "82.0Ref" will appear on the display and the THX indicator will flash. ■ Muting Level `-2dB (fully muted), -50dB to -10dB in 10 dB steps. This setting determines how much the output is muted when the muting function is used (➔ page 53). ■ Maximum Volume `Off, 50 to 99 (Absolute display) `Off, -32dB to +17dB (Relative display) With this setting, you can limit the maximum volume. To disable this setting, select "Off". ■ Power On Volume `Last, Min, 1 to 99 or Max (Absolute display) `Last, -2dB, -81dB to +18dB (Relative display) With this preference, you can specify the volume setting to be used each time the AV receiver is turned on. To use the same volume level that was used when the AV receiver was turned off, select "Last". The "Power On Volume" setting cannot be set higher than the "Maximum Volume" setting. En-73 Operating procedure (➔ page 60)