Palm I705 Handbook - Page 172

Performing HotSync® Operations s A configuration for the kind of modem connection you want to make. See "Connection preferences" in Chapter 17 for more information. Preparing your computer There are a few steps you must perform to prepare your computer for a modem HotSync operation. Be sure to perform these steps before you leave your office so that your computer is ready to receive a call from your handheld. To prepare your Windows computer for a modem HotSync operation: 1. Confirm that the computer modem is connected and turned on, and that no communications applications, such as fax or telephony software, are running on a COM port. Make sure the computer is disconnected from all online services, such as America Online (AOL). This helps to avoid conflicts with the COM port. 2. Start HotSync Manager if it is not already running, and from the HotSync Manager menu, choose Modem. 3. Adjust the following options as needed. Serial Port Speed Modem Setup String Identifies the port for the modem. If you are unsure of the port assignment, look at the Modem Properties in the Windows Control Panel. Determines the speed at which data is transferred. Try the As Fast As Possible rate first, and adjust downward if you experience problems. This setting allows Palm Desktop software and your handheld to find and use the fastest speed. Identifies the modem type or manufacturer. Refer to your modem manual or face plate for its type or settings. If you're not sure of your modem type or your modem doesn't match any that appear in the list, select Hayes Basic. Identifies the setup string for your particular modem. Not all modems require a setup string. Refer to your modem manual and enter the setup string if recommended by the manufacturer. 162