Palm I705 Handbook - Page 173

Conducting a HotSync Operation Via Modem 4. Click OK. To prepare a Macintosh for a modem HotSync operation: 1. Confirm that the Macintosh modem is connected and turned on, and that no communications applications, such as fax or telephony software, or AppleTalk networking are running on that serial port. Make sure the Macintosh is disconnected from all online services, such as America Online (AOL). This helps to avoid conflicts with the serial port. 2. Double-click the HotSync Manager icon in the Palm folder. 3. Click the Serial Port Settings tab. 4. Under Check for handheld connection using, click Modem Setup. 5. Adjust the following options as needed. Modem Identifies the type of modem connected to your Macintosh. If your modem does not appear on the list, use the Hayes Basic setting, or choose Custom to enter a command string. Refer to the manual that came with your modem to find the appropriate command string. Port Identifies the port that Palm Desktop software uses to communicate with the modem. Select the modem or printer port where you connected the modem cable. Modem Speaker Activates the modem's speaker. If you are having trouble connecting, turn on this option to make sure the modem connected to your Macintosh is responding to incoming calls. 6. Close the HotSync Software Setup window. Preparing your handheld There are a few steps you must perform to prepare your handheld for a modem HotSync operation. 163