Panasonic AG-AC90A Operating Instructions Advanced - Page 117

Problem If the SD card is inserted in this unit, it is not recognized. The wireless remote control does not function. Others Check points ≥ If the SD card is formatted on a PC, it may not be recognized by this unit. Use this unit to format SD cards. (l 28) ≥ [REMOTE CONTROL] of the [OTHER FUNCTION] is [OFF]. (l 25) ≥ The button-type battery of the wireless remote control may be run out. Replace it with a new button-type battery. (l 25) ∫ If scenes do not change smoothly when played back on another device The images may be still for several seconds at the joins between the scenes if the following operations are performed when multiple scenes have been continuously played back using another unit. ≥ Just how smoothly the scenes will be played back depends on the playback unit. Depending on the unit used, the images may stop moving and become still for a moment even when none of the following conditions are applicable. ≥ A continuous recording of motion picture data that exceeds 4 GB may momentarily stop at every 4 GB of data when played back with another device. Principal reasons for not playing back smoothly ≥ The recording format [PS] was switched to another recording format when a scene was recorded ≥ When the scenes were recorded on different dates ≥ When scenes lasting under 3 seconds have been recorded ≥ When PRE-REC was used for recording ≥ When deleting scenes ≥ When scenes recorded more than 99 scenes on the same date - 117 -