Panasonic AG-AC90A Operating Instructions Advanced - Page 99
Wind Noise Canceler], Mic Setup], 5.1ch Mic Level], Bass Setting], 2ch Mic Alc], Ext. Mic Gain1]
![]() |
View all Panasonic AG-AC90A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
[WIND NOISE CANCELER] [ON]/[OFF] This will reduce the wind noise coming into the built-in microphones while maintaining the realism. ≥ Set the [MIC SETUP] to anything other than [2ch]. (l 45) ≥ You may not see the full effect depending on the recording conditions. [MIC SETUP] [SURROUND]/[ZOOM MIC]/[FOCUS MIC]/[2ch] Recording setting of the built-in microphone can be adjusted. (l 45) [5.1ch MIC LEVEL] [AUTO]/[SET]/[SETr ] When recording, the input level from the built-in microphones can be adjusted. (l 49) [BASS SETTING] Change the lower setting of the built-in microphone (5.1 ch) according to your choice. ≥ Set the [MIC SETUP] to [SURROUND] or [ZOOM MIC]. (l 45) [0dB]/[+3dB]/[+6dB]/[LOWCUT] ≥ Normally set to [0dB]. ≥ Select [+3dB] or [+6dB] to get strong power feeling at bass level. [2ch MIC ALC] [ON]/[OFF] ≥ Set [MIC SETUP] to [2ch]. (l 45) Distortion of the sound can be reduced when the built-in microphone (2 ch) or external microphone is used by setting to [ON]. ( is displayed on the recording screen) It will record with natural sound when set to [OFF]. ≥ Adjust the audio control knobs (CH1, CH2) to adjust the audio input level. [EXT. MIC GAIN1] [-50dB]/[-60dB] Sets the input level of the external microphone connected to the audio input terminal 1 (XLR 3 pin). [EXT. MIC GAIN2] [-50dB]/[-60dB] Sets the input level of the external microphone connected to the audio input terminal 2 (XLR 3 pin). - 99 -
![](/manual_guide/products/panasonic-agac90a-operating-instructions-advanced-3a5cfa0/99.png)