Panasonic AG-AC90A Operating Instructions Advanced - Page 48
To remove the external microphone, etc., from the audio input terminals 1
View all Panasonic AG-AC90A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
To remove the external microphone, etc., from the audio input terminals 1, 2 (XLR 3 pin) Remove while pushing on the PUSH section of the audio input terminals 1, 2 (XLR 3 pin). ヱヶヴラ ≥ Set the input signal to built-in microphone by switching the CH1, CH2 switches to INT (L) or INT (R) after removing the external microphone. Audio will not be recorded when motion picture is recorded without switching. A PUSH section ≥ Set INPUT1, 2 (+48V) switches to OFF if you connect equipment not compatible with +48 V. You can damage this unit or such equipment if you leave the setting at ON. ≥ This unit is turned off when a problem occurs with the +48 V power supply. ≥ The battery will discharge faster if you use a phantom microphone. - 48 -
- 48 -
To remove the external microphone, etc., from the audio input terminals 1, 2
(XLR 3 pin)
Remove while pushing on the PUSH section of the audio
input terminals 1, 2 (XLR 3 pin).
≥
Set the input signal to built-in microphone by switching the
CH1, CH2 switches to INT (L) or INT (R) after removing
the external microphone. Audio will not be recorded when
motion picture is recorded without switching.
≥
Set INPUT1, 2 (+48V) switches to OFF if you connect
equipment not compatible with +48 V. You can damage this unit or such equipment if you
leave the setting at ON.
≥
This unit is turned off when a problem occurs with the +48 V power supply.
≥
The battery will discharge faster if you use a phantom microphone.
A
PUSH section