Panasonic AG-AC90APJ Operating Instructions Advanced - Page 62
Zebra, Color Bar Screen, ZEBRA button, BARS button
View all Panasonic AG-AC90APJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Zebra ZEBRA button It will switch between the zebra display and the marker display every time the button is pressed. Zebra 1 # Zebra 2* # Marker* # setting canceled * It is not displayed when the [ZEBRA DETECT 2]/[MARKER] is set to [OFF]. (l 101) Zebra display: Parts where white saturation (color saturation) is likely to occur (extremely brightly lit or shiny parts) are displayed with diagonal lines (zebra pattern). Marker display: Displays the luminance level of the center of the screen (luminance display frame) in %. It makes the adjustment of the brightness of the object easier, by checking the luminance level of the object, when recording same object in different surroundings. ≥ Marker display is displayed between 0% and 99%. It will be displayed as 99% when it is over 99%. ≥ You can record an image with little white saturation if you manually adjust the shutter speed or brightness. (l 42, 44) ≥ The zebra pattern does not appear on the images actually recorded. ≥ It is also possible to adjust the level of the zebra pattern to be displayed. (l 100, 101) Color Bar Screen BARS button Press the BARS button to output a color bar screen to a television or monitor so you can adjust them. ≥ To cancel, press the BARS button again. ≥ It will be canceled when the unit is turned off. ≥ While the color bar is displayed, a test tone will be output from the headphone terminal, HDMI terminal and AV multi terminal. (The test tone that is output will be 1 kHz.) It will not be output from the speaker of this unit. ≥ It is possible to record the color bar screen. ≥ It is not possible to display/hide the color bar during recording. - 62 -