Panasonic AG-DVX100BPS Operating Instructions - Page 22
Mounting the battery
View all Panasonic AG-DVX100BPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Mounting the battery 1 Raise the viewfinder. Removing the battery While pressing the battery eject button, slide the battery upward to remove. OSet the POWER switch to OFF, and check that the CAMERA/VCR lamp has gone off before removing the battery. OSupport the battery with your hand to ensure that it will not drop. 2 Push the battery straight in, and slide it downward until it clicks into position. Battery eject button 1 23 3 Return the viewfinder to its original position. Supplying power from the AC adapter 1 Raise the viewfinder. 2 Push the battery-type connector on the DC cable straight in, and slide it downward until it clicks into position. 3 Connect the DC cable to the AC adapter. 4 Connect the AC cable to the power outlet. 5 Return the viewfinder to its original position. CAUTION: This unit will operate on 110/120/220/240V AC. An AC plug adapter may be required for voltages other than 120V AC. If a conversion plug is required, consult with your dealer as to which one is to be purchased. 22 1 2 4 3 Connect the AC adapter correctly as shown in the figure. OThe battery cannot be charged while supplying power from the AC adapter to the camera recorder.