Panasonic AG-DVX100BPS Operating Instructions - Page 43
RECORDING SETUP screen
View all Panasonic AG-DVX100BPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Setting menus RECORDING SETUP screen Item/ (display mode) Description of settings REC SPEED (Camera) (VCR) For selecting the recording time mode. SP : SP (standard play) mode LP : LP (long play) mode AUDIO REC (Camera) (VCR) For selecting the system for converting the recording to PCM audio. 12 bit : 12-bit/32kHz 16 bit : 16-bit/48kHz MIC ALC (Camera) For setting the mic level automatic control function to ON or OFF. OFF ON MIC GAIN 1 (Camera) For setting the input level of the external microphone which is connected to the INPUT 1 connector. -50 dB -60 dB MIC GAIN 2 (Camera) 1394 TC REGEN (VCR) For setting the input level of the external microphone which is connected to the INPUT 2 connector. -50 dB -60 dB For selecting the time code to be recorded when recording the signals of a component connected to the DV connector. OFF: The signals are recorded using the time code which was set using the TC MODE item, TCG item and FIRST REC TC item. ON: The signals are recorded using the time code of the signals which have been input to the DV connector. O When ON has been selected as this item's setting, this setting takes precedence over the TC MODE item, TCG item and FIRST REC TC item settings. O When no signals are supplied to the DV connector, the TC MODE item, TCG item and FIRST REC TC item settings are followed. TC MODE (Camera) (VCR) For selecting the time code correction mode in which the time code of the internal time code generator is to be recorded. DF : The drop frame mode is used. NDF : The non-drop frame mode is used. O When the progressive mode has been set to 24P or 24P (ADV), the non-drop frame mode is established regardless of this item's setting. TCG (Camera) (VCR) For setting the operation mode in which the internal time code generator is to be run. FREE RUN: The internal time code generator is run regardless of the operation mode. REC RUN: The internal time code generator is run during recording. Item/ (display mode) Description of settings FIRST REC TC (Camera) (VCR) For selecting the time code which is to be recorded when recording is started. REGEN: Recording proceeds in such a way that the time code continues on (is regenerated) from the time code on the tape. PRESET: The time code is not regenerated from the time code on the tape. The time code is recorded using the value set in the TC PRESET item serving as the initial value. However, the time code is forcibly regenerated when shooting with frameto-frame continuity has been performed. TC PRESET (Camera) (VCR) For setting the initial value of the time code to be recorded. This item's setting is valid when PRESET has been selected as the setting for the FIRST REC TC item. O When the progressive mode has been set to 24P or 24P (ADV), set the frame value to 0 or to a multiple of 5. If any other value is set, the time code recorded will shift. 1394 UB REGEN (VCR) For selecting the user's bit to be recorded when recording the signals of the component connected to the DV connector. OFF: The user's bit selected for the UB MODE item is used for the recording. ON: The user's bit of the signals input to the DV connector is used for the recording. O When ON has been selected as this item's setting, this setting takes precedence over the UB MODE item setting. O The user's bit is not recorded if the signals do not contain the user's bit information. O When no signals are supplied to the DV connector, the UB MODE item setting is followed. The underlining indicates the factory setting. 43