Panasonic AG-DVX100BPS Operating Instructions - Page 31
Adjusting the black balance, ATW Auto Tracking White, function
View all Panasonic AG-DVX100BPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
White balance and black balance Adjusting the black balance There is normally no need to re-adjust the black balance. Adjustment is required only in the following cases. OWhen the camera recorder is to be used for the first time OWhen the camera recorder is to be used after it has not been used for an extended period OWhen the camera recorder is to be used in a situation where the ambient temperature will vary significantly OWhen the progressive mode has been switched to the standard (60i) mode or vice versa In the standard (60i) mode The white balance is adjusted automatically by pressing the AWB button. If the button is then held down, the black balance is adjusted. In the progressive mode By simply pressing the AWB button, the white balance is adjusted automatically, and then the black balance is adjusted. ATW (Auto Tracking White) function The ATW function can be allocated to the WHITE BAL switch (A, B or PRST position) using the ATW item on the setting menu SW MODE screen. (See page 40) Similarly, the ATW function can be allocated to the AUTO button using the ATW item on the setting menu AUTO SW screen. (See page 41) When material is shot using the ATW function, it is recorded while the white balance is being continually adjusted automatically. OThe ATW function automatically identifies the shooting environment and adjusts the white balance optimally. In some environments, a slight adjustment error may arise. If an extremely accurate white balance adjustment is required, adjust the white balance by following the instructions on the previous page. OWhen the AWB button is pressed, the white balance is adjusted first. Therefore, ensure that the conditions under which the white balance is adjusted are satisfied before pressing the button. OWhile recording is in progress, the black balance cannot be adjusted. Message that appears while adjustment is underway ABB ACTIVE Message that appears upon completion of the adjustment ABB END 31