Panasonic AG-DVX100BPS Operating Instructions - Page 42
PLAYBACK FUNCTIONS screen
![]() |
View all Panasonic AG-DVX100BPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Setting menus PLAYBACK FUNCTIONS screen Item/ (display mode) Description of settings END SEARCH (VCR) For setting what kind of operation is to be performed when the END SEARCH button is pressed. BLANK: The unrecorded blanks on the video tape are searched. REC END: The part which was shot last is searched. O Even when the REC END setting is selected, the part which was shot last will not be searched when the tape is switched. O If nothing has been recorded on the tape, operation will stop at the end of the tape. O END SEARCH may not operate properly if there is an unrecorded blank near the tape start or at a point along the tape. Inputs and audio tracks recorded Input When audio dubbing When shooting (12-bit mode) Internal microphone L Internal microphone R INPUT 1 (XLR) CH1 CH2 CH1 CH3 CH4 CH3 INPUT 2 (XLR) CH2 (CH1) CH4 (CH3) AUDIO IN/OUT CH1 (pin jack) AUDIO IN/OUT CH2 (pin jack) __ __ CH3 CH4 The audio tracks on which signals are to be recorded during shooting can be changed using the CH1 SELECT switch and CH2 SELECT switch. The audio tracks on which signals are to be recorded during audio dubbing can be changed using the A DUB INPUT item on the AV IN/OUT SETUP screen. Item/ (display mode) Description of settings 12bit AUDIO (VCR) AUDIO OUT (VCR) For setting the sound to be output as the CH1 and CH2 signals when a tape recorded in the 12-bit audio mode is played back. ST1: The sound recorded during shooting is selected. CH1 signals = CH1 track CH2 signals = CH2 track ST2: The sound recorded during audio dubbing is selected. CH1 signals = CH3 track CH2 signals = CH4 track MIX: The sound recorded during shooting and the sound recorded during audio dubbing are mixed. CH1 signals = CH1 + CH3 tracks CH2 signals = CH2 + CH4 tracks If the sound has been recorded in the 16-bit mode, there is no CH3 or CH4. Therefore, the correlation between the signals and tracks will always be as follows: CH1 signals = CH1 track CH2 signals = CH2 track For setting the audio signals to be output from the AUDIO IN/OUT connectors (pin jacks) when a tape is played back. CH1•CH2: CH1 connector = CH1 signals CH2 connector = CH2 signals CH1: CH1 connector = CH1 signals CH2 connector = CH1 signals CH2: CH1 connector = CH2 signals CH2 connector = CH2 signals 12-bit AUDIO item and AUDIO OUT item settings, and audio tracks whose signals are output from the AUDIO IN/OUT connectors (pin jacks) Audio recording mode 12-bit AUDIO item setting AUDIO OUT item setting AUDIO IN/OUT CH1 output AUDIO IN/OUT CH2 output CH1•CH2 CH1 ST1 CH1 CH1 CH2 CH2 CH2 CH1 CH2 12 bit CH1•CH2 CH3 ST2 CH1 CH3 CH2 CH4 CH4 CH3 CH4 16 bit MIX __ __ CH1•CH2 CH1 CH2 CH1+CH3 CH1 CH1 CH2 CH2+CH4 CH2 CH1 CH2 The underlining indicates the factory setting. 42
![](/manual_guide/products/panasonic-agdvx100bps-operating-instructions-ad79757/42.png)