Panasonic AG-DVX100BPS Operating Instructions - Page 44

Setting menus RECORDING SETUP screen Item/ (display mode) Description of settings UB MODE (Camera) (VCR) For setting what is to be recorded as the user's bit. USER: The user's information is recorded. TIME: The time of the recording is recorded. DATE: The date of the recording is recorded. TCG: The time code generator's value is recorded. FRM. RATE: The frame rate information for frame conversion is recorded. 22 02 22 22 Recording control information O Updated frame information O REC START/STOP information Frame rate information O Frame rate (60, 30 or 24) O I/P identification information O Conversion information O Frame rate coefficient Frame sequence number O A number from 0 to 4 is displayed in the 24P or 24P (ADV) mode. O "F" is displayed in the 60 or 30P mode. UB PRESET (Camera) (VCR) User's bit value verification information For setting the user's bit. However, USER must be selected for the UB MODE item setting. The underlining indicates the factory setting. 44 Item/ (display mode) Description of settings INTERVAL REC (Camera) For setting the intermittent recording mode. OFF: Intermittent recording is not performed. ON: When the START/STOP button is pressed, intermittent recording is performed with the cycle set by the REC TIME item and INTERVAL TIME item. ONE-SHOT: The time lapse shooting mode is established. When the START/STOP button is pressed, recording is performed for the number of seconds set by the REC TIME item, after which the recording pause mode is established. O When intermittent recording is set to ON or ONE-SHOT, "I -" flashes on the left of the VCR operation mode. When recording is started, it stops flashing and lights. O Even when intermittent recording is set to ON or ONE-SHOT, the intermittent recording mode returns to OFF when the power is turned off. O When the progressive mode has been set to 24P or 24P (ADV), the OFF is established regardless of this item's setting. REC TIME (Camera) For setting the recording duration for which intermittent recording is to be performed. 0.5s : 0.5 sec. 1s : 1.0 sec. 1.5s : 1.5 sec. 2s : 2.0 sec. INTERVAL TIME (Camera) For setting the duration of the interval time with which intermittent recording is to be performed. 30s : 30 sec. 1m : 1 min. 5m : 5 min. 10m : 10 min. AV IN/OUT SETUP screen Item/ (display mode) Description of settings A DUB INPUT (VCR) DV OUT (VCR) For selecting the sound which is to be recorded when audio dubbing is performed. MIC: The sound from the internal microphone or the sound from the external components connected to the INPUT 1 and 2 connectors is recorded. (The sound is selected using the CH1 SELECT switch and CH2 SELECT switch.) A_IN: The sound of the audio component connected to the AUDIO IN/OUT connectors (pin jacks) is recorded. If audio dubbing is performed when the sound has been recorded in the 16-bit audio mode, the sound will be recorded over the sound heard during shooting. For setting the function, which converts the analog signals which have been input into digital signals and outputs them from the DV connector, to ON or OFF. OFF ON