Panasonic BB-HCM403A Operating Instructions - Page 104
Detectable, Undetectable, An alarm signal is detected.
View all Panasonic BB-HCM403A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Operating Instructions 8. After you confirm the settings and click [Next>], set E-mail notification and click [Next>]. • If you select [Enable], the E-mail Notification When Triggered page is displayed. Enter the settings referring to page 102-103. Setting Disable Enable Description • The camera does not send an E-mail notification when buffering or transferring images. • The camera sends an E-mail notification (up to 3 destinations) when buffering or transferring images. 9. Click [Save] after confirming the settings. • The new settings are saved. • When finished, "Success!" is displayed. Note • If you click [Save], all buffered images on the internal memory and SD memory card are deleted. 10. Click [Go to Trigger page]. • The Trigger page is displayed. Note • If you set a short interval when transferring images to a cell phone, many Emails will be sent, which may lead to a large phone bill. Therefore, we recommend you to set a long interval. 1 image per second frequency is recommended. • Alarm transfer stops operating until after the camera finishes all transfers. For example, if the camera transfers 3 images per minute and 6 images in total, alarm detection will follow the pattern below. 120 seconds 1st 2nd 3rd 4th 5th 6th Detectable Undetectable Detectable An alarm signal is detected. 104