Panasonic BB-HCM403A Operating Instructions - Page 109
Enable Post-trigger
View all Panasonic BB-HCM403A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Operating Instructions Note • • Due to the network environment, object, the number of simultaneous access, enabling IPsec or SD memory recording, the camera may not record number of images that you set. In this case, set the image buffer frequency longer. Set Every [1 s], buffer [1] images for the SD memory recording. Setting Enable Pre-trigger • Image Buffer • Enable Post-trigger • Image Buffer • Description Check the box to enable the setting. The camera buffers or transfers the image right before the motion detection signal is detected. Set an interval, number of images to buffer and total number. The number of buffered images may not match the total number (see page 177) due to memory capacity, image resolution, image quality or what object you view. Check the box to enable the setting. The camera buffers or transfers the image right after the motion detection signal is detected. Set an interval, number of images to buffer and total number. The number of buffered images may not match the total number (see page 177) due to memory capacity, image resolution, image quality or what object you view. 7. Select the transfer method, and click [Next>]. • • Note • Clicking [